

Fasten Sonar plate 100x100mm set for boltrope
Tax included. Shipping calculated at checkout
Registrujte se nebo se přihlaste a získejte okamžitou slevu 5 % na váš první nákup! Navíc si budujete slevu podle celkové útraty:
🔹 Nový zákazník – 5 % sleva
- Sleva pro každého registrovaného zákazníka.
- Platí při útratě do 20 000 Kč.
🔹 Top zákazník – 8 % sleva
- Po dosažení celkové útraty 20 001 Kč se vaše sleva automaticky zvýší na 8 %.
🔹 VIP zákazník – 12 % sleva
- Pokud celková útrata překročí 60 001 Kč, získáváte nejvyšší slevu 12 %.
Pravidla a podmínky slevového programu
- Slevu lze využít pouze po přihlášení.
- Sleva se nesčítá s jinými slevami a akcemi.
- Pokud od poslední objednávky uplyne více než 12 měsíců, vaše sleva se automaticky resetuje na základních 5%.
- Na Free Spirit pruty lze uplatnit maximální slevu 5%.
Produkty, na které se sleva nevztahuje
- Velká balení
- Čluny, loďky a jejich příslušenství
- Vybrané pruty
Pickup available at Mikbaits Mladá Boleslav
Usually ready in 24 hours

Fasten Sonar plate 100x100mm set for boltrope
Mikbaits Mladá Boleslav
Podlázky 150
293 01 Mladá Boleslav
Czechia
The platform is attached to the adapter using the end grooves and the adapter washer with M6*30 DIN 912 screw and M6 DIN 985 nut, allowing 360° rotation. The main slots of the inclined connection between the platform and the mounting system are 27.7°. It is equipped with Dp230 model washers with 7.5° grooves and a spring for quick separation of the grooves. The tilt position is fixed using an M6*60 DIN 933 screw, an M6 DIN 985 nut and a hexagonal knob. The set includes adjustable pads made of pressed PVC, 5 mm thick, equipped with double-sided 3M VHB tape. Plastic parts are made of polyamide reinforced with glass fibers.
The system is easily dismantled without leaving traces on the surface of the ship. To minimize the gap between the mounting pad and the inflatable balloon, the kit includes an elastic pad with 3M VHB tape for better adhesion to the inflatable balloon. It is recommended to install the system on a blown cylinder. The base of the device is fixed with self-tapping screws in accordance with the step-by-step installation instructions. Using the marks, you can drill holes or make any holes for installing any equipment. To extend product life, rinse with plenty of fresh water after use in seawater.
Materials used in the product: polyamide reinforced with glass fibers, PVC, stainless steel A2, brass.
Transport
We offer our customers several options of delivery to their address. In addition, all orders above 500 CZK will get free delivery within the Czech Republic.
DPD
- With card payment
- With payment on delivery
- Foreign orders
GLS
- With card payment
- With payment on delivery
- Foreign orders
Pick up
In case the delivery to your address does not suit you, you can conveniently pick up your order at our company headquarters:
Podlázky 150
293 01 Mladá Boleslav
Czechia
Our customer support is available from Monday to Friday: 8:00am - 6:30pm.
Contact us in the chat at the lower right corner of this page.
Average reaction time: 15 min
