Fasten Sonar beam holder with plate 100x100mm and telescopic arm

Sonar probe holder (base length 450 mm) with screen area 100x100 mm. This mount allows both the sonar probe and the sonar screen to be attached. It is suitable for both inflatable boats and Belly boaties. You can easily attach it to the Fasten quick-release locks. The sonar probe is attached to the bottom of the holder, where there is a large nut made of solid plastic and toothed washers, which allow both a very firm fixation of the probe and the possibility of adjusting its position. The standing leg of the sonar screen is fixed to the surface with the help of screws. There is a mounting point on the bottom of the surface that you slide in and lock into any Fasten quick-release bracket. Thanks to the lower telescopic leg, the immersion depth of the probe can be easily changed. In turn, the joints on the top allow for optimal adaptation to any boat or Belly boat and improve compliance. The holder is optimal when placed on the side of the boat. Thanks to 90 st. rotate the handle, the probe is turned in the direction of travel and works as if you had it on the rear view mirror. But it can also be used at the back, i.e. classically over the mirror.