Fasten Mounting pad for T-Track 110x110mm

Sale price 249,00 Kč

Tax included. Shipping calculated at checkout

Věrnostní program

Registrujte se nebo se přihlaste a získejte okamžitou slevu 5 % na váš první nákup! Navíc si budujete slevu podle celkové útraty:

🔹 Nový zákazník – 5 % sleva

  • Sleva pro každého registrovaného zákazníka.
  • Platí při útratě do 20 000 Kč.

🔹 Top zákazník – 8 % sleva

  • Po dosažení celkové útraty 20 001 Kč se vaše sleva automaticky zvýší na 8 %.

🔹 VIP zákazník – 12 % sleva

  • Pokud celková útrata překročí 60 001 Kč, získáváte nejvyšší slevu 12 %.
Pravidla a podmínky slevového programu
  • Slevu lze využít pouze po přihlášení.
  • Sleva se nesčítá s jinými slevami a akcemi.
  • Pokud od poslední objednávky uplyne více než 12 měsíců, vaše sleva se automaticky resetuje na základních 5%.
  • Na Free Spirit pruty lze uplatnit maximální slevu 5%.
Produkty, na které se sleva nevztahuje
  • Velká balení
  • Čluny, loďky a jejich příslušenství
  • Vybrané pruty

SKU: MP219
Only 18 units left

Pickup available at Mikbaits Mladá Boleslav

Usually ready in 24 hours

Fasten Mounting pad for T-Track 110x110mm

Fasten Mounting pad for T-Track 110x110mm

Mikbaits Mladá Boleslav

Pickup available, usually ready in 24 hours

Podlázky 150
293 01 Mladá Boleslav
Czechia

+420602212269
Mounting platform with T-Track groove to hold a T-bolt holder, e.g. FS218, FS223, FS227,... The MB218 platform is designed to install the FS218, FS223, FS227 T-bolt lock on the surface of any PVC inflatable (motorized boat or rowing boat, boat, belly boat, SUP board, inflatable kayak, etc...). The design has three advantages that make the mounting system extremely reliable. The first is the radius base, which follows the shape of the balloon and thus provides additional strength to the adhesive joint. The second is the increased bonding area (compared to the Mp218 pad). Thirdly, the PVC platform is reinforced with a polyamide insert, which provides additional strength to the product. The side holes serve as two holders for the fastening belt. The kit also includes a cover to protect the inside of the pad from water and dirt when not in use.

The platform is square, has an increased adhesive surface (110 x 100 mm). Made of PVC, reinforced with a polyamide insert, in the center of which there is a hole for fixing the lock with a T-screw. On both sides there are elongated holes for fastening a belt up to 35 mm wide. The package includes a protective cover made of polyamide.

Materials used in the product: polyamide reinforced with glass fibers, PVC.
Any questions about this product?

Our customer support is available from Monday to Friday: 8:00am - 6:30pm.
Contact us in the chat at the lower right corner of this page.
Average reaction time: 15 min