Fasten Holder on back of the boat with two mounts

The universal holder for a boat mirror or pipe with two locks is a great helper, thanks to which you don't have to glue or drill anything. The set is intended for mounting accessories with an adapter with external grooves of 30 ° on pipes O 20 - 32 mm and surfaces with a thickness of 10 to 32 mm without drilling. It consists of 2 locks, model Fs219 and a mounting platform - clamps. The structure of the clamp includes a bracket whose inner upper part is covered with PVC, a clamp with an M3.2 DIN 6799 lock washer, equipped with a polyurethane seal that repeats the shape of the pipe. The force of compression is regulated by a double-edged handle. Internal grooving of locks - 30 °. Each of the locks is attached to the mounting platform with 4 M6 * 20 DIN 912 screws and M6 DIN 934 nuts. The attachment adapter is installed completely into the lock, the locking mechanism of which is in the open position ( UNLOCK ), then the lock is moved to the LOCK position and 7 of the 12 adapter teeth are clamped. The set includes protective PVC plugs. The main parts are made of polyamide reinforced with glass fibers. Connecting elements - stainless steel class A2.

"This mounting kit allows two accessories to be attached at once to pipes with a diameter of 20 - 32 mm and surfaces with a thickness of 10 to 32 mm. The FMk -2 system is easy to install - installation does not require drilling and the use of tools It is universal: it can be installed on the railing, installation takes a few minutes, immediately after completion the set can be used for the intended purpose., The body of the platform is covered inside with elastic PVC and the clamp is made made of polyurethane. The clamp corresponds to the shape of the tube, which ensures a stronger attachment to the handles.
The FMk-2 kit includes two Fs219 locks. For the convenience of using the kit, a hex key is included in the kit. Each of the locks has four points of attachment to the platform, which adds additional strength to the structure. When installing on the railing, it should be borne in mind that although the inner surface of the platform provides good adhesion to the pipe, when attaching accessories that require a high load (for example, a spinning rod on an extension used for trolling), a slight axial rotation is allowed.
The locks are suitable for mounting any BORIKA FASTen® accessory and also - provided that adapters are used - accessories and equipment from other manufacturers (Scotty, RAM Mount, Railblaza, YakAttack, carp tackle). Fixing is quick and simple: after removing the protective plug of the lock, it is necessary to set the locking mechanism to the UNLOCK position, insert the accessory adapter as far as it will go and move the lock to the LOCK position. The accessory can be fixed in any position by rotating the adapter around its axis in steps of 30 °.
The fiberglass-reinforced polyamide from which the main parts of the kit are made provides resistance to stress, seawater and weather conditions.
Important design element_ during installation, we recommend unscrewing the screw to a slight stop and leaving a small gap. After use, it is recommended to rinse the kit with plenty of fresh water. If you plan to use the locks in sub-zero temperatures, it is recommended to regularly lubricate the red o-ring on the adapter with silicone grease. This prevents the formation of a water film on the moving parts of the lock and adapter, the freezing of which can disrupt the operation of the mechanism.