{"title":"Bases","description":"","products":[{"product_id":"fasten-drzaky-adapter-na-sedackovou-listu-pro-uchyceni-prislusenstvi","title":"Fasten System for mounting on Boltrope","description":"Seat rail adapter for attaching Fasten accessories with a joint. The MX mounting system allows you to attach accessories equipped with a tilting function (joint) to the seat rail. The inclined joint is equipped with adjusting washers, which make it possible to reduce the inclination step to 7.5°. Using this mounting system, almost all BORIKA FASTen® tilting accessories (HT213, SLT223, SST223, etc.) can be mounted on PVC inflatables. The only exceptions are those whose use is accompanied by increased dynamic load.\u003cbr\u003e \u003cbr\u003eThe design of the system includes double-sided slots with a step of 27.7°. The kit includes 2 Dp230 transition washers that reduce the slot spacing to 7.5°, a spring for quick separation of the slots, a cap that serves as a plug, a hex handle and fasteners_ M6*60 DIN 933 screw and M6 DIN 985 nut. 5 mm thick molded PVC pads are added to the platform to allow for a better fit to the boat balloon. The pads are equipped with double-sided 3M VHB tape. Plastic parts are made of polyamide reinforced with glass fibers.\u003cbr\u003e The mounting system is recommended to be installed on a semi-inflated cylinder.\u003cbr\u003e\u003cbr\u003e Materials used in the product: polyamide reinforced with glass fibers, PVC, stainless steel A2, brass.\u003cbr\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47834172850455,"sku":"MX","price":599.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/mx.png?v=1706278926"},{"product_id":"fasten-drzaky-drzak-na-zrcadlo-s-dvema-rychloupinacimi-drzaky","title":"Fasten Holder on back of the boat with two mounts","description":"The universal holder for a boat mirror or pipe with two locks is a great helper, thanks to which you don't have to glue or drill anything. The set is intended for mounting accessories with an adapter with external grooves of 30 ° on pipes O 20 - 32 mm and surfaces with a thickness of 10 to 32 mm without drilling. It consists of 2 locks, model Fs219 and a mounting platform - clamps. The structure of the clamp includes a bracket whose inner upper part is covered with PVC, a clamp with an M3.2 DIN 6799 lock washer, equipped with a polyurethane seal that repeats the shape of the pipe. The force of compression is regulated by a double-edged handle. Internal grooving of locks - 30 °. Each of the locks is attached to the mounting platform with 4 M6 * 20 DIN 912 screws and M6 DIN 934 nuts. The attachment adapter is installed completely into the lock, the locking mechanism of which is in the open position ( UNLOCK ), then the lock is moved to the LOCK position and 7 of the 12 adapter teeth are clamped. The set includes protective PVC plugs. The main parts are made of polyamide reinforced with glass fibers. Connecting elements - stainless steel class A2.\u003cbr\u003e \u003cbr\u003e\"This mounting kit allows two accessories to be attached at once to pipes with a diameter of 20 - 32 mm and surfaces with a thickness of 10 to 32 mm. The FMk -2 system is easy to install - installation does not require drilling and the use of tools It is universal: it can be installed on the railing, installation takes a few minutes, immediately after completion the set can be used for the intended purpose., The body of the platform is covered inside with elastic PVC and the clamp is made made of polyurethane. The clamp corresponds to the shape of the tube, which ensures a stronger attachment to the handles. \u003cbr\u003eThe FMk-2 kit includes two Fs219 locks. For the convenience of using the kit, a hex key is included in the kit. Each of the locks has four points of attachment to the platform, which adds additional strength to the structure. When installing on the railing, it should be borne in mind that although the inner surface of the platform provides good adhesion to the pipe, when attaching accessories that require a high load (for example, a spinning rod on an extension used for trolling), a slight axial rotation is allowed. \u003cbr\u003eThe locks are suitable for mounting any BORIKA FASTen® accessory and also - provided that adapters are used - accessories and equipment from other manufacturers (Scotty, RAM Mount, Railblaza, YakAttack, carp tackle). Fixing is quick and simple: after removing the protective plug of the lock, it is necessary to set the locking mechanism to the UNLOCK position, insert the accessory adapter as far as it will go and move the lock to the LOCK position. The accessory can be fixed in any position by rotating the adapter around its axis in steps of 30 °.\u003cbr\u003e The fiberglass-reinforced polyamide from which the main parts of the kit are made provides resistance to stress, seawater and weather conditions. \u003cbr\u003eImportant design element_ during installation, we recommend unscrewing the screw to a slight stop and leaving a small gap. After use, it is recommended to rinse the kit with plenty of fresh water. If you plan to use the locks in sub-zero temperatures, it is recommended to regularly lubricate the red o-ring on the adapter with silicone grease. This prevents the formation of a water film on the moving parts of the lock and adapter, the freezing of which can disrupt the operation of the mechanism.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47834176192791,"sku":"FMK2","price":1699.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmk2.jpg?v=1706278934"},{"product_id":"fasten-drzaky-oboustranny-drzak-pro-pripevneni-na-trubku","title":"Fasten Double mount with platform for installation on tube 22\/25mm","description":"\u003cp\u003eUniversal double-sided quick-release bracket for attaching to a 22\/25 mm tube, thanks to its very simple and reliable lock, you can attach any accessories to boats, such as sonar probe, rod holder, sonar screen plate, holders for tablets, phones, cameras or Go for cameras, anchor ties, fixing hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The holder is attached to pipes with a diameter of 22\/25 mm.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"22\/25mm","offer_id":47834179076375,"sku":"FMR225","price":999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmr225_1.jpg?v=1706278948"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-pro-prisroubovani","title":"Fasten Mount with platform for installation on hard surface","description":"\u003cp\u003eUniversal quick-release bracket with a base (washer), thanks to its very simple and reliable lock, you can attach any accessories to boats, such as a sonar probe, rod holder, plate for the sonar screen, holders for tablets, phones, cameras or Go for cameras, ties anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The holder is supplied with four screws, four screws and a tightening Allen key. With the help of screws, you first screw the base to, for example, the transom of the ship or another solid plate. The upper part of the holder is then easily attached to the base with screws.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"with a pad","offer_id":47865330729239,"sku":"FMB","price":499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmb.jpg?v=1706279373"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-set-na-sedackovou-listu","title":"Fasten Compact mount set for Boltrope","description":"\u003cp\u003eThis FS227 locking mounting system simply attaches to the seat rail of the inflatable boat without gluing or drilling. The FMX225 kit, which consists of an accessory lock and mounting pad of the MX model, allows various accessories to be installed on this mounting cable with an adapter with 30° external grooves. An important advantage of this method of installing accessories is that it is not necessary to waste time installing or waiting for the glue to dry. The platform together with the installed accessories can be easily dismantled without leaving any traces on the boat.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47931454816535,"sku":"FMX225","price":899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmx225.png?v=1706279665"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-s-deskou-pro-prisroubovani","title":"Fasten Mount with enlarged platform for hard surface","description":"\u003cp\u003eUniversal quick-release bracket with a base (washer), thanks to its very simple and reliable lock, you can attach any accessories to boats, such as a sonar probe, rod holder, plate for the sonar screen, holders for tablets, phones, cameras or Go for cameras, ties anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The holder is supplied with four screws, four screws and a tightening Allen key. With the help of screws, you first screw the base to, for example, the transom of the ship or another solid plate. The upper part of the holder is then easily attached to the base with screws.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47931454750999,"sku":"FFR444","price":699.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/ffr444.jpg?v=1706279877"},{"product_id":"fasten-drzaky-adapter-s-kloubem-pro-dva-zamky","title":"Fasten Adapter with joint for two mounts","description":"\u003cp\u003eAdapter with tilting mechanism, joint and two locks for connecting two Fasten accessories.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916187779351,"sku":"AV221","price":224.0,"currency_code":"CZK","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/av221.jpg?v=1707652513"},{"product_id":"fasten-drzaky-adapter-se-zavitem","title":"Fasten Adapter with thread","description":"\u003cp\u003e Threaded adapter for attaching fishing tackle. The adapter locks into a classic holder, e.g. FMP, FMS, FS227 or FS219, and on the other end you screw anything with a classic thread, most often detectors or a rod clip. A tightening ring is included.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916187812119,"sku":"AC001","price":499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/ac001.png?v=1707652517"},{"product_id":"fasten-drzaky-hrazda-350mm-s-tremi-drzaky-a-1-upevnovacim-bodem","title":"Fasten Round rail with three mounts 350mm and one fastening point","description":"\u003cp\u003e350 mm long crossbar with three quick-release brackets and one attachment point. This trapeze allows you to have 3 different accessories next to each other. There are 3 quick-release brackets on it, thanks to which a very simple and reliably functioning lock allows you to attach any accessories to boats, such as a sonar probe, a rod holder, a plate for a sonar screen, holders for tablets, phones, cameras or Go for cameras, anchor ties, attachment hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. This trapeze is attached in the same way.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916187844887,"sku":"GM350-3","price":2999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/gm350-3_1.jpg?v=1707652522"},{"product_id":"fasten-drzaky-hrazda-500mm-s-tremi-drzaky-a-2-upevnovacimi-body","title":"Fasten Round rail with three mounts 500mm and two fastening point","description":"\u003cp\u003e500 mm long crossbar with three quick-release brackets and one attachment point. This trapeze allows you to have 3 different accessories next to each other. There are 3 quick-release brackets on it, thanks to which a very simple and reliably functioning lock allows you to attach any accessories to boats, such as a sonar probe, a rod holder, a plate for a sonar screen, holders for tablets, phones, cameras or Go for cameras, anchor ties, attachment hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. This trapeze is attached in the same way.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916187877655,"sku":"GRP500-3","price":3199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/grp500-3_1.jpg?v=1707652526"},{"product_id":"fasten-drzaky-hrazda-700mm-s-tremi-drzaky-a-2-upevnovacimi-body","title":"Fasten Round rail with three mounts 700mm and two fastening point","description":"\u003cp\u003e700 mm long bar with three quick-release brackets and two fixing points. This trapeze allows you to have 3 different accessories next to each other. There are 3 quick-release brackets on it, thanks to which a very simple and reliably functioning lock allows you to attach any accessories to boats, such as a sonar probe, a rod holder, a plate for a sonar screen, holders for tablets, phones, cameras or Go for cameras, anchor ties, attachment hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. This crossbar is attached in the same way in two places.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916187910423,"sku":"GRP700-3","price":3249.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/grp700-3_1.png?v=1707652530"},{"product_id":"fasten-drzaky-prodluzovaci-drzak-s-kloubem","title":"Fasten Adapter with joint for two mounts","description":"The articulated extension bracket is an excellent solution for installing accessories on board a boat that does not have a tilt function.  \u003cbr\u003eIt can also be used to create different structures as another slanting knot. The lock is attached to the swivel adapter with a splined joint, screw and handle nut. By loosening the fasteners, you can choose any angle of inclination and fix the accessories in this position.\u003cbr\u003e The design can be supplemented with extensions of various models with a classic lock.\u003cbr\u003e The FAv210 fits into any accessory lock. Its adapter has a 30° external spline and can be rotated 360° around the axis in 30° increments.\u003cbr\u003e The lock included in the assembly is equipped with a ROLL \u0026amp; LOCK accessory locking system_ the lock body is rotated counterclockwise, moving the locking mechanism to the open position, then the adapter is inserted into the lock until it stops and the lock is turned clockwise. The lock is compatible with all BORIKA FASTen® accessories.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916187943191,"sku":"FAV210","price":599.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fav210.png?v=1707652534"},{"product_id":"fasten-drzaky-prodluzovaci-drzak-s-kloubem-250mm","title":"Fasten Accessory Mount with joint and Extender 250mm","description":"The FEX250 Extension Bracket is designed to attach accessories to the deck of a vessel that require height, overboard and tilt adjustments relative to the installation location when in use. This is a multifunctional kit that is relevant for those who need to fix accessories at a distance of 250 mm from the installation site, without wasting time assembling the structure using an extension piece. The FEX250 installs in seconds into any pre-installed\u003cbr\u003e the castle on the ship. The kit adapter can be rotated 360° around the axis in 30° increments and locked in the selected position.\u003cbr\u003e The FEX250 lock and extension is easily combined with all BORIKA FASTen® accessories. Attachment of accessories according to the ROLL \u0026amp; LOCK principle_\u003cbr\u003e the lock body is rotated counter-clockwise, moving the locking mechanism to the open position, then the adapter is inserted into the lock,  \u003cbr\u003euntil it stops and the lock turns clockwise. The lock is inserted into the extension tube, the connection between the extension and the swivel-folding one\u003cbr\u003e with an adapter, it has a tilt angle of 27.7 °. The inclination of the attachment with a fixed lock relative to the plate is fixed by the handle nut.\u003cbr\u003e The assembly can be supplemented with adapter washers Dp230 with 7.5 ° grooves, which allows you to more precisely adjust the tilt position of the accessory.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916187975959,"sku":"FEX250","price":999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fex250.png?v=1707652540"},{"product_id":"fasten-drzaky-prodluzovaci-drzak-se-dvema-klouby-100mm","title":"Fasten Accessory Mount with two joints and Extender 100mm","description":"This bracket is intended for fixing accessories at a distance of 100 mm from the installation point.\u003cbr\u003e The assembly includes a holder, an extension (L - 100 mm) and an adapter with side grooves.\u003cbr\u003e On one side, the attachment is attached together with the accessory holder and on the other\u003cbr\u003e side using an adapter. Both joints have 27.7° grooves and are equipped with M6 * 50 screws\u003cbr\u003e DIN 931 (one on each side) and M6 DIN 934 nuts.\u003cbr\u003e The inclination of each of the joints is fixed by tightening the hexagonal nut of the handle. \u003cbr\u003eThe internal grooves of the holder included in the assembly are 30 °.\u003cbr\u003e The outer holes of the adapter, through which the structure is fixed in the assembly\u003cbr\u003e of the system previously installed on the ship, are also 30 °.\u003cbr\u003e The main pieces are made of polyamide reinforced with glass fibers.\u003cbr\u003e Extension tube - made of powder-coated anodized aluminum.\u003cbr\u003e Fastening material - made of stainless steel class A2 (except for two brass nuts M6 DIN 934).","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188008727,"sku":"FEX100","price":899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fex100.png?v=1707652545"},{"product_id":"fasten-drzaky-prodluzovaci-drzak-se-dvema-klouby-205mm","title":"Fasten Accessory Mount with two joints and Extender 205mm","description":"This bracket is intended for fixing accessories at a distance of 220 mm from the installation point.\u003cbr\u003e The assembly includes a holder, an extension (L - 205 mm) and an adapter with side grooves.\u003cbr\u003e On one side, the attachment is attached together with the accessory holder and on the other\u003cbr\u003e side using an adapter. Both joints have 27.7° grooves and are equipped with M6 * 50 screws\u003cbr\u003e DIN 931 (one on each side) and M6 DIN 934 nuts.\u003cbr\u003e The inclination of each of the joints is fixed by tightening the hexagonal nut of the handle. \u003cbr\u003eThe internal grooves of the holder included in the assembly are 30 °.\u003cbr\u003e The outer holes of the adapter, through which the structure is fixed in the assembly\u003cbr\u003e of the system previously installed on the ship, are also 30 °.\u003cbr\u003e The main pieces are made of polyamide reinforced with glass fibers.\u003cbr\u003e Extension tube - made of powder-coated anodized aluminum.\u003cbr\u003e Fastening material - made of stainless steel class A2 (except for two brass nuts M6 DIN 934).","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188041495,"sku":"FEX220","price":949.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fex220.png?v=1707652550"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-pro-pripevneni-na-c-profil-t-track","title":"Fasten Mount with platform for installation on C-shaped T-Track","description":"\u003cp\u003eUniversal quick release bracket for C-shaped profiles, thanks to which a very simple and reliable lock allows you to attach any accessories to boats, such as sonar probe, rod holder, sonar screen plate, holders for tablets, phones, cameras or Go for cameras, ties anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The holder is intended for attachment to C-shaped profiles. The assembly includes two nuts for adjusting the longitudinal position in the profile.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188074263,"sku":"FMA","price":999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fma.jpg?v=1707652554"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-pro-pripevneni-na-c-profil-t-track-1","title":"Fasten Mount with platform for installation on C-shaped T-Track","description":"\u003cp\u003eUniversal quick-release bracket with a base (washer), thanks to its very simple and reliable lock, you can attach any accessories to boats, such as a sonar probe, rod holder, plate for the sonar screen, holders for tablets, phones, cameras or Go for cameras, ties anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188107031,"sku":"FFR222","price":999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/ffr222.jpg?v=1707652557"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-pro-pripevneni-na-trubku-22-25mm","title":"Fasten Mount with platform for installation on tube 22\/25mm","description":"\u003cp\u003eUniversal quick-release bracket for mounting on 22\/25 mm pipe, thanks to its very simple and reliable lock, you can attach any accessories to boats, such as sonar probe, rod holder, sonar screen plate, holders for tablets, phones, cameras or Go pro cameras, tie rods, anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The holder is attached to pipes with a diameter of 22\/25 mm.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188467479,"sku":"FMR125","price":799.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmr125_1.jpg?v=1707652563"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-pro-pripevneni-na-trubku-30-32mm","title":"Fasten Mount with platform for installation on tube 30\/32mm","description":"\u003cp\u003eUniversal quick-release bracket for attaching to a 30\/32 mm pipe, thanks to its very simple and reliable lock, you can attach any accessories to boats, such as sonar probe, rod holder, sonar screen plate, holders for tablets, phones, cameras or Go pro cameras, tie rods, anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The holder is attached to pipes with a diameter of 30\/32 mm.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188533015,"sku":"FMR132","price":799.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmr132_1.jpg?v=1707652569"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-se-svorkou","title":"Fasten Mount with clip for installation on shaped tubes","description":"\u003cp\u003eUniversal quick-release bracket with clamp, thanks to the very simple and reliable lock, you can attach any accessories to boats, such as sonar probe, rod holder, sonar screen plate, holders for tablets, phones, cameras or Go for cameras, anchor ties, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The holder is fixed with a clamp to pipes or other objects.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188565783,"sku":"FMC","price":1299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmc.jpg?v=1707652575"},{"product_id":"fasten-drzaky-ramova-konstrukce-na-velke-cluny-s-dvema-drzaky","title":"Fasten Aluminium Support Stand with two mounts","description":"This aluminum structure is specially created for attachment to large boats Elling - Pilot, KB PRO TRIMARAN and KARDINAL, as well as other brands. The construction is equipped with two locks, which are suitable for fastening, for example, rod holders, as well as other accessories. The recommended use is for so-called trolling fishing. The diameter of the rod structure is 32 mm and the span is 110 cm. It is intended for fixing accessories up to 80 cm high and at the same time serves as a support for maintaining balance while trolling. Can be used as a frame for an awning. Stand width - 1.1 m - ideal for installation on PVC motor boats. In the design of the adapters, with the help of which it is fixed in the locks on the vessel, gimbal joints are available, which allow you to adjust the width and slope of the structure. Two FMR132 mounting systems are installed on the side tubes. They are suitable for fixing any BORIKA FASTen® accessory and, provided that transition adapters developed by BORIKA® designers are used, they can also be used to install accessories and equipment from other manufacturers - SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, carp tackle. The specified mounting systems, when loosening the screws that fasten the elements of the platform, move along the railing and rotate around its axis, which allows you to flexibly adjust the position of the fixed accessories. By tightening the fastening screws on the sides of the platform, it can be immovably fixed in the chosen place and position. Fixing the accessory is simple - just move the lock latch to the open position, insert the accessory adapter as far as it will go and move the blind to the LOCK position.\u003cbr\u003e \u003cbr\u003eThe construction consists of a frame made of O 32 mm pipe fragments, fixed by inclined joints with washers with 7.5° grooves on the Dp230 model and 2 additional supports of O 32 mm pipe, attached to the frame by two movable joints with associations. The stand is equipped with 4 adapters in the shape of a 12-pointed star for mounting on a vessel. Cardan joints are in the form of adapters. The assembly also includes fasteners_ 4 DIN 931 M6*50 screws and 4 double-sided plastic handles with inserted M6 DIN 934 nuts. Two FMr132 systems are attached to the sides of the cabinet (each assembly contains 4 M6*30 DIN 912 screws, 8 M6 DIN 934 nuts , 6 screws M6*20 DIN 912, 2 nuts M6 DIN 985). The tube is made of anodized aluminum, the main parts are made of polyamide reinforced with glass fibers.\u003cbr\u003e \u003cbr\u003eYou need four heavy-duty mounting systems (two on each side of the board) to install the stand on the boat. The user can also install FMr132 (single-lock) or FMr232 (dual-lock) mounting systems on the rack tubes. This greatly expands the possibilities of installing accessories on the kayak. When using the system in sub-zero temperatures, it is recommended to periodically lubricate the red O-ring on the fixed accessory adapter with silicone. This will prevent the formation of a water film on the moving parts of the lock and adapter, which can damage the operation of the mechanism when it freezes. After use in seawater, we recommend rinsing the product with plenty of fresh water.\u003cbr\u003e\u003cbr\u003e Materials used in the product: polyamide reinforced with glass fibers, PVC, anodized aluminum, stainless steel A2, brass.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916188598551,"sku":"STP110","price":5499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/files\/STP110_1.png?v=1787638780"},{"product_id":"fasten-t-track-lista-pro-rychloupinaci-drzak-t-track-pro-prisroubovani-150mm","title":"Fasten Mounting pad for T-Track 150mm","description":"T-Track bar for quick-release brackets with T-screw for screwing 150 mm. The TRK150 platform is designed to expand the equipment options of various vessels (fishing kayaks, boats, solid-stone boats). Suitable for installation on Quintrex, SeaJay Boat, Horizon Boat, Savage Boat, Haines Signature Boat and many others. Allows mounting of locks and accessories using T-bolts from both BORIKA FASTen® and other brands. It has a T-Track groove and is suitable for fixing one or two locks with side or bottom universal T-bolts. The platform can also be used to install accessories equipped with T-bolt adapters, such as the cup holder of the CUPt model. To install the lock, simply insert its T-bolt into the hole in the center of the platform, slide it along the platform and secure it in place by tightening the nut. It is made of fiberglass reinforced polyamide as a one-piece casting with six surface mounting points and is reliable when used with heavy accessories. The platform has a stylish design and compact dimensions - it protrudes above the surface by only 1 cm, its length is 15 cm. \u003cbr\u003eIt is screwed to the surface in a vertical or horizontal position with 6 self-tapping screws 4, 2*16 DIN 7981, which are included in the package. Allows you to move installed locks and accessories along the entire length of the platform. It is made of polyamide reinforced with glass fibers, the connecting elements are made of stainless steel class A2.\u003cbr\u003e\u003cbr\u003e Fasteners required for installation are included in the kit. The platform can be installed on any solid horizontal surface (then the T-Track groove will point upwards) or on a vertical one, eg the bow of motor inflatable boats (then the T-Track groove will point inwards or overboard).\u003cbr\u003e\u003cbr\u003e Materials used in the product: polyamide reinforced with glass fibers, stainless steel A2.\u003cbr\u003e\u003cbr\u003e Complete set_ trackpad TRk150, six self-tapping screws 4, 2*16 DIN 7981.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916221563159,"sku":"TRK150","price":299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/trk150_1.png?v=1707653876"},{"product_id":"fasten-t-track-rychloupinaci-drzak-do-t-track","title":"Fasten Compact mount for T-Track with T-Bolt","description":"The quick-release bracket for T-Track (C profile) is the basic bracket for attaching all Fasten accessories. It is intended for mounting accessories equipped with adapters with external 30 ° grooves on boats and fishing kayaks equipped with T-Track. The construction consists of a 48 mm diameter x 41 mm high accessory holder and a universal T-bolt (45 x 25 x 12 mm) attached below. The internal grooves of the holder are 30 °.\u003cbr\u003e To install the accessory, switch the locking mechanism to the open position (by turning the bracket counterclockwise), insert the adapter fully into the slots, and turn the bracket clockwise.\u003cbr\u003e This will clamp 7 of the adapter's 12 teeth. The main pieces are made of polyamide reinforced with glass fibers. Connecting material (screw M6 * 16 DIN 912, washer M6 DIN 9021) - made of stainless steel class A2.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916221595927,"sku":"FS227","price":349.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fs227_1.png?v=1707653880"},{"product_id":"fasten-t-track-rychloupinaci-drzak-do-t-track-bocni","title":"Fasten Compact mount for T-Track with side T-Bolt","description":"The T-Track (C profile) side quick-release bracket is an easy, lightweight bracket for all Fasten accessories. Attaching accessories to C-profiles and T-Track rails on boats and kayaks has a number of advantages, the main one being that no tools are required during the installation process.\u003cbr\u003e Installation is quick and the lock is ready to use immediately. The Fs223 is a T-bolt side lock, which is a more compact and lighter version of the FMA mounting kit.\u003cbr\u003e It is mounted on the C profile without the use of other platforms, it is easy to move along the profile, it is fixed in the selected place by tightening the T-screw and the handle-nut.\u003cbr\u003e The construction is ideal for mounting accessories on the profile facing the inside of the ship. Depending on what accessories are planned to be fixed with a lock.\u003cbr\u003e However, it is also possible to install it on upward facing profiles. Accessories fixed in this way will be placed overboard or inside the space of the vessel.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916221628695,"sku":"FS223","price":499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fs223_1.png?v=1707653884"},{"product_id":"fasten-t-track-rychloupinaci-drzak-do-t-track-s-okem","title":"Fasten Compact mount for T-Track with T-Bolt and eye","description":"The quick-release bracket for T-Track (C profile) with an eye is a compact lock that is installed in a C profile or T-track bracket, it moves easily along the profile and is\u003cbr\u003e fixed in the selected place by tightening the T-bolt and the handle - nut. The lower T-bolt lock is ideal for attaching accessories to an upward-facing profile.\u003cbr\u003e In this case, the accessory adapter fixed in it is directed perpendicular to the profile on which the lock is installed.\u003cbr\u003e Fs218 is easily combined with all BORIKA FASTen® accessories, you can attach a rod holder, a holder for photo and video equipment, a surface for sonar and many\u003cbr\u003e other accessories.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916221661463,"sku":"FS218","price":399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fs218_1.png?v=1707653889"},{"product_id":"fasten-t-track-zakladna-pro-rychloupinaci-drzak-t-track-pro-nalepeni-100mm","title":"Fasten Mounting pad for T-Track 100mm","description":"Mounting platform with T-Track groove to hold a T-bolt holder, e.g. FS218, FS223, FS227,... The MB218 platform is designed to install the FS218, FS223, FS227 T-bolt lock on the surface of any PVC inflatable (motorized boat or rowing boat, boat, belly boat, SUP board, inflatable kayak, etc...). The construction is compact (the round platform has a diameter of 10 cm) and reliable. The PVC platform is reinforced with another platform made of polyamide, which ensures the high strength of the product. The platform has two side holes, thanks to which you can also attach it to a fastening belt. The kit also includes a cover to protect the inside of the pad from water and dirt when not in use. \u003cbr\u003eThe platform has a round shape (O 100 mm). Made of PVC, reinforced with a polyamide insert, in the center of which there is a hole for fixing the lock with a T-screw. On both sides there are longitudinal notches for attaching to the belt. It is glued to the PVC surface using a two-component polyurethane glue (not included in the package). The set includes a protective cover made of polyamide.\u003cbr\u003e\u003cbr\u003e Materials used in the product: polyamide reinforced with glass fibers, PVC.\u003cbr\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916221694231,"sku":"MP218","price":199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/mp218_1.png?v=1707653894"},{"product_id":"fasten-t-track-zakladna-pro-rychloupinaci-drzak-t-track-pro-nalepeni-110x110mm","title":"Fasten Mounting pad for T-Track 110x110mm","description":"Mounting platform with T-Track groove to hold a T-bolt holder, e.g. FS218, FS223, FS227,... The MB218 platform is designed to install the FS218, FS223, FS227 T-bolt lock on the surface of any PVC inflatable (motorized boat or rowing boat, boat, belly boat, SUP board, inflatable kayak, etc...). The design has three advantages that make the mounting system extremely reliable. The first is the radius base, which follows the shape of the balloon and thus provides additional strength to the adhesive joint. The second is the increased bonding area (compared to the Mp218 pad). Thirdly, the PVC platform is reinforced with a polyamide insert, which provides additional strength to the product. The side holes serve as two holders for the fastening belt. The kit also includes a cover to protect the inside of the pad from water and dirt when not in use.\u003cbr\u003e \u003cbr\u003eThe platform is square, has an increased adhesive surface (110 x 100 mm). Made of PVC, reinforced with a polyamide insert, in the center of which there is a hole for fixing the lock with a T-screw. On both sides there are elongated holes for fastening a belt up to 35 mm wide. The package includes a protective cover made of polyamide.\u003cbr\u003e\u003cbr\u003e Materials used in the product: polyamide reinforced with glass fibers, PVC.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916221726999,"sku":"MP219","price":249.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/mp219_1.png?v=1707653899"},{"product_id":"fasten-t-track-zakladna-pro-rychloupinaci-drzak-t-track-pro-prisroubovani","title":"Fasten Mounting pad for T-Track","description":"Mounting platform with T-Track groove to hold a T-bolt bracket, e.g. FS218, FS223, FS227,... The MB218 platform is designed to install the FS218, FS223, FS227 T-bolt lock on hard surface vessels (aluminum boats, boats fiberglass, fishing kayaks, etc.). It is screwed to aluminum, fiberglass, polyethylene or wooden surfaces using the fasteners included in the kit. The platform has four points of attachment to the surface. The design is compact (the platform protrudes above the surface by only 1 cm), it has a diameter of 66 mm.\u003cbr\u003e\u003cbr\u003e The platform is made as a one-piece molded product from polyamide reinforced with glass fibers. It is screwed to the surface with 4 M4 self-tapping screws. 8*16 DIN 9200, which are included in the package.\u003cbr\u003e\u003cbr\u003e Materials used in the product: polyamide reinforced with glass fibers, stainless steel A2.\u003cbr\u003e\u003cbr\u003e Complete set_ platform MB218, four self-tapping screws M4, 8*16 DIN 9200.","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":47916221759767,"sku":"MB218","price":199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/mb218_1.png?v=1707653903"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-pro-nalepeni-na-clun","title":"Fasten Universal sticking mount 110x110mm","description":"\u003cp\u003eUniversal quick-release bracket with adhesive base 110x110 mm, thanks to its very simple and reliable lock, you can attach any accessories to boats, such as sonar probe, rod holder, sonar screen plate, holders for tablets, phones, cameras or Go for cameras, ties anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The base can be glued to the boat balloons using a special PVC glue. It can also be glued to a seat, ship's mirror or to the floor, but it is always necessary to choose the glue with regard to the given surface.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"110x110mm","offer_id":47931423326487,"sku":"FMP224","price":599.0,"currency_code":"CZK","in_stock":true},{"title":"140x140mm","offer_id":47931423359255,"sku":"FMP225","price":699.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fmp224.jpg?v=1707663749"},{"product_id":"fasten-drzaky-rychloupinaci-drzak-s-3m-lepici-paskou","title":"Fasten Universal mount with 3M sticking tape","description":"\u003cp\u003eUniversal quick-release bracket with adhesive base 110x110 mm and 3M tape, thanks to its very simple and reliable lock, you can attach any accessories to boats, such as sonar probe, rod holder, sonar screen plate, holders for tablets, phones, cameras or Go pro cameras, tie rods, anchors, fastening hooks, oars, bars and more. All of these Fasten accessories have a specially shaped attachment point on the ends that easily fits into the quick release bracket. Then just insert the fuse and the accessory is firmly connected to the holder. The base has a special 3M tape on the bottom, which after peeling off the protective film, you can easily stick it to hard surfaces, such as a ship's mirror, a seat or a solid floor. Not suitable for sticking to inflatable parts of the boat.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"110x110mm","offer_id":47931423260951,"sku":"FMS224","price":999.0,"currency_code":"CZK","in_stock":true},{"title":"140x140mm","offer_id":47931423293719,"sku":"FMS225","price":1199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/products\/fms224.jpg?v=1707663759"},{"product_id":"fasten-ramova-konstrukce-na-velke-cluny-s-dvema-drzaky-80x140","title":"Fasten Rámová konstrukce na velké čluny s dvěma držáky 80x140","description":"\u003cp\u003eTato hliníková konstrukce je speciálně vytvořena pro připevnění k velkým člunům Elling - Pilot, KB PRO TRIMARAN a KARDINAL, ale i jiných značek. Konstrukce je vybavena dvěma zámky, které jsou vhodné k upevnění např. držáků na pruty, ale i dalšího příslušenství. Doporučené použití je k tzv. trolling rybolovu. Průměr tyčové konstrukce je 32 mm a rozpětí 140 cm. Je určen pro upevnění příslušenství ve výšce do 80 cm a zároveň slouží jako podpěra pro udržení rovnováhy ve stoje při trollingu. Lze použít jako rám pro markýzu. Šířka stojanu - 1,4 m - ideální pro instalaci na PVC motorové čluny. V designu adaptérů, pomocí kterých je upevněn v zámcích na plavidle, jsou k dispozici kardanové spoje, které umožňují nastavit šířku a sklon konstrukce. Na bočních trubkách jsou instalovány dva montážní systémy modelu FMR132. Jsou vhodné pro upevnění jakéhokoli příslušenství BORIKA FASTen® a za předpokladu použití přechodových adaptérů vyvinutých konstruktéry BORIKA® je lze použít i pro instalaci příslušenství a zařízení jiných výrobců - SCOTTY®, RAM®, RAILBLAZA®, YakAttack®, kaprařské náčiní. Specifikované montážní systémy při povolování šroubů, které upevňují prvky plošiny, pohybují se po zábradlí a otáčejí se kolem jeho osy, což umožňuje flexibilně nastavit polohu pevného příslušenství. Utažením upevňovacích šroubů na bocích plošiny ji lze nehybně upevnit na zvolené místo a pozici. Upevnění příslušenství je jednoduché - stačí posunout západku zámku do otevřené polohy, nasadit adaptér příslušenství až na doraz a posunout roletu do polohy LOCK.\u003c\/p\u003e\n\u003cp\u003eKonstrukce se skládá z rámu tvořeného úlomky trubky O 32 mm, upevněného šikmými spoji s podložkami s 7,5° drážkami u modelu Dp230 a 2 přídavnými podpěrami z trubky O 32 mm, připevněnými k rámu dvěma příchytkami s pohyblivými klouby s asociacemi. Stojan je vybaven 4 adaptéry ve tvaru 12cípé hvězdy pro upevnění na plavidlo. Kardanové klouby jsou v provedení adaptérů. Součástí sestavy jsou také upevňovací prvky: 4 šrouby DIN 931 M6*50 a 4 oboustranné plastové úchyty s vloženými maticemi M6 DIN 934. Na boky rozvaděče jsou připevněny dva systémy FMr132 (každá sestava obsahuje 4 šrouby M6*30 DIN 912, 8 matic M6 DIN 934 , 6 šroubů M6*20 DIN 912, 2 matic M6 DIN 985). Trubka je vyrobena z eloxovaného hliníku, hlavní části jsou vyrobeny z polyamidu vyztuženého skelnými vlákny.\u003c\/p\u003e\n\u003cp\u003eK instalaci stojanu na loď potřebujete čtyři montážní systémy určené pro zvýšené zatížení (dva na každé straně desky). Uživatel může také instalovat dodatečné montážní systémy modelů FMr132 (s jedním zámkem) nebo FMr232 (se dvěma zámky) na trubky racku. To výrazně rozšiřuje možnosti instalace příslušenství na kajak. Při používání systému při teplotách pod nulou se doporučuje pravidelně mazat červený O-kroužek na pevném adaptéru příslušenství silikonem. Zabráníte tak vytvoření vodního filmu na pohyblivých částech zámku a adaptéru, který při zamrznutí může poškodit činnost mechanismu. Po použití v mořské vodě doporučujeme produkt opláchnout velkým množstvím čerstvé vody.\u003c\/p\u003e\n\u003cp\u003eMateriály použité ve výrobku: polyamid vyztužený skelnými vlákny, PVC, eloxovaný hliník, nerezová ocel A2, mosaz.\u003c\/p\u003e","brand":"Borika Fasten","offers":[{"title":"Default Title","offer_id":57912055038334,"sku":"STP140","price":5999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/files\/STP140_1.png?v=1787639081"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0838\/4453\/0455\/collections\/Navrh_bez_nazvu_3.png?v=1709920598","url":"https:\/\/mikbaits.com\/en\/collections\/zakladny-borika-fasten.oembed?page=2","provider":"Mikbaits","version":"1.0","type":"link"}